Originally posted by KingpinSVT:
You took the pinch/through bolt off, right?
I think thats the bolt that he is having problems with.
Edit
Reading it again, maybe thats not....hmmm.
Anyways, there is a bolt that runs through the knuckle that sits in a groove in the ball joint. remove the bolt then as they said, use a large prybar and that will take it out. I used a cement breaking bar that is like 40lb's and 5 ft long and it popped right out. You can not just simply smack the arm down and think its going to pop out. There is tension from the two bolts up top that keep a constant pressure on the ball joint keeping it up and in the knuckle. So a pry bar is a must. The longer the better.
Last edited by posthuman63t; 08/24/06 07:53 AM.
