Originally posted by Ã?Å?ber Evil Mushu!:
Originally posted by Black 98 CSVT:
yeah... i wanted just to be sure that what im doing is alright. baking at 325 farenheit for 3 minutes? just want to be sure. i dont wanna do it just to screw them all up and buy another set of new headlights
NO BAKING!!!!!!!!!!!!
Do not CUT!!!!!
Ive cut close to 7 sets now, and baked one. Ill tell you now. BAKIGN FMTFW.
Cutting leaves you with sealing problems, baking will not!
As long as you have newer headlights with the black silicon glue (black overflow instead of yellow uv glue) you are ok.
heat for 4 ish minutes at a time at 295* slowly prying in places. Be sure you are not warping the U channel that holds the glass.
trust me, ive done two projecter sets by cutting headlights, and ive cut 5 other sets open for R&D purposes. Baking is the best/safest way to get these open and re-sealed.
Once I seal up the set im doing now, ill be baking for sure, no spidering, no melting, just perfect headlight opening!
Alex
'99 SVT Contour
-=|WANTED: Vortech, working or not |=-
| 
