dual stage direct port on forged internals. apparently diamond racing will make any C/R piston i want so i am going to see about getting 12:1. ive got a stage3 disc and if thats nice i'll put a fresh one in this winter. the ports will be opened up slightly on the exhaust side with a set of custom longtube headers mating to a 3" single exhaust (back to duals at 2.5") i still need to see what i can do for cams, but im thinking ST200 valvesprings and maybe CAT cams if theres nothing else. the secondaries will be opened up and a billet aluminum spacer is going in (assuming i can make it work, its being drawn up now) my nitrous nozzles will be placed in the spacer and then bolted between the upper and lower intakes. 3 litre valves will go on the stock 2.5L heads. originally i planned on running alot less nitrous than i wanted to but i think i can run a first stage of 150 and a second of 100 totaling at 250 and hopefully stage2 axles are enough to keep the front end from hurting myself or someone else. if the car revs like i plan i should hit the first stage at 3200 rpm and the second at 5500 and it should rev out to 8400 rpm if it would all work out the way i wanted. we dont live in a perfect world though, we'll have to see. as for this fall, before the new engine is done i'll have a dual stage setup with a 75 and 50 shot on it. we'll see how the stock axles hold up on that and a stage3 clutch.
