Originally posted by BrApple-SeVT:

Originally posted by SVTatGT:
did the low reading continue to go up as you filled it. i.e. if it started at 60/15 did it end up being 60/20 after a while.

When i filled mine a couple year ago when the compressor was cycling it was reading high and low, but when I put enough in for the compressor to actually stay on, it was the lower reading that was staying.




in 60 to 70 degree weather the compressor should cycle, when it gets above 90 the compressor should pretty much just stay on .... so you can't just fill until the compressor stays on, depending on the temp you just overfilled the system



i didn't just dump stuff in there untill the compressor stayed on, i put stuff in there untill the reading on the pressure gauge was right. my point was that the lower reading he was getting is the reading he should look at. Is that correct or incorrect?

And i live in Georgia, so the temp is generally around or above 90 all summer

Cameron 98 Black CSVT #2958