|
|
|
|
Joined: Aug 2001
Posts: 65
CEG\'er
|
OP
CEG\'er
Joined: Aug 2001
Posts: 65 |
Originally posted by SvtTour98.5-3:
I just simply removed the nut from the hub and sprayed some penetrating oil around the spindle. Let it soak for a few minutes then used a dead blow hammer and gently tapped the hub off of the spindle.
You were correct. I got the puller from Advance Auto and it fit, when I started to pull, the hub slid right off.
I can't see why the service manual shows a puller being used..it is not needed.
'98 LS MTX
|
|
|
|
|
|
|
