Originally posted by redneckboarder:
how do i get at my gauge clusetr in my 98 svt contour, it has no lights and the fuse is fine so i need to trace the power wire so i need to take the gauges out
thanks
redneckboarder



First, SEARCH...

There already is a how-to on this.

Alright. So pop off the contour thingy on the dash, behind it will be 2 screws, take them out. There is also one behind the defroster button, and there are 2 right above the guages. Pull the trim piece off and you will see 5 screws, undo them and Voila!

Also, did you check to make sure your dimmer isnt on REALLY LOW.

99 TRed Contour SVT # 1853 out of 2760 230.2 WHP @ 6500 237.0 WTR @ 2250
Originally posted by MxRacer:
Originally posted by RawBurt:
I'll be keeping it to myself, until the time comes. It'll be hard to find.

much like your weiner.