Splicing new sensors

Print Thread

Re: Splicing new sensors #1617245 07/27/06 03:37 AM
Joined: Aug 2001 Posts: 5,810 Ozark, AL W warmonger_dup1 Hard-core CEG'er
warmonger_dup1 Hard-core CEG'er W Joined: Aug 2001 Posts: 5,810 Ozark, AL	Originally posted by ncalaskan: Thanks anyone ever used the escape power steering pump on their hybrid? -Seth Yep, works good too. It's lighter weight than the stock contour pump since the pump housing and mounting points are all one-piece aluminum now. Very lightweight by comparison, maybe 1/4-1/3 the weight of the stock pump and mounting plate. You can use all but a couple of bolts from the old pump I think but you can see which ones won't be necessary anymore. Also it uses a splined pulley with a single nut to remove it versus the four bolts to hold the stock pulley on. Former owner of '99 CSVT - Silver #222/2760 356/334 wHP/TQ at 10psi on pump gas! See My Mods '05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red '06 Mazda5 Touring, 5spd,MTX, Black

Link Copied to Clipboard

Contour Enthusiasts Group Archives Forums Modifications 3.0L Duratec Splicing new sensors