Originally posted by DemonSVT:
Originally posted by posthuman63t:
Tried that also...impact pushing 120 ft/pds...held it on there for minutes...
A 120lb/ft impact gun sounds quite weak. My 1/2" I/R is 475. (well originally anyway  ) Even my butterfly is 150.
The simplest way is to cut off the pulley at the hex. Then impact it off. Even a sharp blow (dead blow or 4x4 of wood) with a 1/2" breaker bar will pop it with the pulley cut off. (old news  )
OMG, HE LIVES!!!
475 ft-lbs, you didn't buy yours at Sears then did you? lol
Mine was 250 ft-lbs, a chicago pneumatic.
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
| 
