Originally posted by MapOfTaziFoSho:
Originally posted by beyondloadedSE:
if the wheel studs are tightened and you can shake the wheel, then the wheel bearings are bad.
Most likely, but also look at your tie rods and ball joints.
Werd. I think if the wheel has movement when you have your hands at the 12 and 6 position of the tire, then it's a bearing, but if it's from 9 to 3, then it could be tie rods or ball joints.
Mark
2000 Black CSVT
3.0L Hybrid - 206fwhp & 195fwtq
| 
