Originally posted by chris8852:
...

I have the haynes manual. It doesnt help with this problem any as the schematics are not detailed enough.
... but dont show the wiring for the brake light.



Okay, I pulled out the Haynes manual. On Diagram 1, Starting, charging, warning lights and gauges (Chapter 12), it shows From Instrument cluster connector C808b/3 (Pin 3), Black/Yellow goes to Low Brake Fluid Sensor (in the brake fluid reservoir). From there, two wires, (1) Black to ground, (2) Black/Blue to fusible link. From fusible link, Black/Red to Handbrake warning Switch (handbrake lever). Check wiring to and from these items. Good luck.

Instrument Panel Access
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=trouble&Number=1012899&fpart=1&PHPSESSID=

Need to remove console to see parking brake switch.
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1b/da/e7/0900823d801bdae7.jsp

Parking brake cable access
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1b/d9/47/0900823d801bd947.jsp



Last edited by Tony2005; 07/24/06 10:31 PM.
"Always do the cheap and easy ones first." 1996 V6 ATX 96K miles