I put a new 195 F thermostat in and cleared the codes. The car stalled at a stop sign but restarted. It was acting like it was starving for fuel for a moment then began to run a little better but still not like it should. After driving about 5 miles code P1132 was sent (Mfg fuel air mixture out of range) or something like that. Here is the freeze frame:
RPM 3094
Calc load % 20.4
coolant temp 189 F
LT FTRM1 % 0.0
ST FTRM1 % -20.3
LT FTRM2 % 0.0
ST FTRM2 % -18.0
Speed 52
Fuel sys CLSD
I cleared the codes again and drove about 18 miles. This time no stalling but still sluggish. As I drove I noticed the fuel sys. was going from open to closed. When I come down a hill and let totally off the throddle the fuel sys. opens when I press the pedal lightly the system closes when I press harder the system opens again. Is this normal? However no codes were sent during this drive cycle.
I have not learned how to download the info. for the scanner yet.
