Hey All,

I've got a Haynes Manual (piece of crap)

I've got the How To Article (much better than the Haynes)

Working on the front left spring/strut:
I had no problem getting out all the bolts out to free the strut (used my airtools), but can't get the darn strut to come out! The knuckle is in the way.

I should mention I DID NOT take the knuckle off the A-arm, as I don't have a TORX bit that big...is this step NEEDED? The Haynes manual doesn't even mention taking that bolt out...nor do they use spring compressors...I don't see how this darn strut is gonna come out...help..

If I do need the TORX bit ...what size is it? The largest I have is a T-50.

I was very close to packing everything up and taking it in to have it done, but I decided to see if you guys could help.


Rob
PS. I am or hopefully will be installing the BAT Kit.

Last edited by Rob___; 07/19/06 04:37 AM.