Originally posted by Seawulf:
That's why I like turbo's cause you get all the boost down low, in my setup anyway, where the rods can handle the stress easier, but the JRSC only gives full boost up high where the stresses are much higher.
I don't know if that is quite accurate. I think the JRSCs & other screw type blowers provide full boost at relatively low RPM up to redline - Lower than a turbo from what I've read. So the issue is relatively moot in this case.
The centrifugal SC units have relatively linear boost curves by comparison, so maybe that is what you're thinking of... 
Must be that jumbly-wumbly thing happening again.
| 
