|
|
Joined: Jan 2005
Posts: 1,118
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Jan 2005
Posts: 1,118 |
Originally posted by m4gician: For a mystique, is it easy and should I remove the rear reflector when I intend to paint it body colour?
its just liek any other contique, 4 bolts IIRC. its easy and if i were doing it, id take it off. less chance of overspray on the car. just my opinion
Originally posted by m4gician: Secondly, would my steps be simple as Sand, Prime, Paint, Paint again, clear, and clear again?
pretty much. i wouldnt sand the unpainted reflector. just make sure its clean and wax free and start with the primer. the more clear...the shinyier it will be!
Originally posted by m4gician: Third, when sanding, would I use 400grit Sandpaper, 220, or what? What do you guys recommend? I know 400 is for sanding the prime, but would just using a regular rattle can work fine? If you guys can help out with that, Im going to go for it .
you could start out with 400 or so, but as you get more and more coats of paint on, go down to a super smooth wet sand paper. if go as far as 200 grit, for a nice look! HTH
kevin m
98 T-red mystique gs
zetec ATX
| my ride |
|
|
|
|
|
|