Originally posted by Tony2005:
And some good pictures by a CEGer (I wonder who that is  ) in the Duratec Maintenance FAQ. Note that is for a wheel/knuckle bearing removal.
[wheel knuckle how to link]
Blech. I was over simplified. my bad. Like Tony pointed out, yank the wheel, two 15mm bolts on the front calipers, support them somewhere and slide the rotor off.
If you can change your brakes, you can change the rotors.
better, Tony? 
'99 CSVT - Silver #222/276
In a constant state of blow-off euphoria.
Originally posted by Kremitthefrog:
I like to wear dresses and use binoculars to watch grandmas across the street.
| 
