ok thanks i apreeciate all the attempts at helping i shoulda said more but i didnt know there were so many ways.......i had a guy helping me but he stuck me out to dry and i aint gotta clue so my cars just been sitting for bout 4 months with nothing done........ok

im using the 3.0 bottom and heads with the 2.5 cams etc. and intake i belive from what i can recall him saying. I pretty much want to get it back going now with more power than what i had before as a basic start.......but since i have it all torn now i woulod like to produce as much power but at the same time i dont want a freakin 10 sec.drag car i ust spent 10gs on.....if you get what im saying. Im a bagged minitruckin draggin frame or building air struts for cars ect.....not much of an engine guy. I can do it no problem if i know what to do or saw someone do it first. So thats why i asking for specific and details about it so i can actually do myself.

I dont know where to begin so like im open to many suggestions as to whats the best way if you get what im saying there.

Is this a little more help than the first post?

ONe other thing the only thing that has been done is the 3.0l has been taken apart......heads off and everything above nothing below the heads has been remove except for like the pulleys chain and ect.......The 2.5 intakemanifold been removed fuel inectors and little numerous things but nothing else.....also the 3.0l heads have been cut for the svt gaskets....and thats it....they havent been filled in or anything else done yet bc i dont know what to do next or where to begin.

Last edited by Matt J; 07/01/06 08:26 PM.