2 digit codes.
http://www.thorssell.net/hbook/2digit.html

12 Idle Speed Control motor or Air Bypass not controlling idle properly (generally idle too low)

Check/clean/change IAC valve.

22 MAP (vacuum) or BARO signal out of range

Check/clean/change MAF sensor

35
EVR - (O, R, M) EVP sensor signal is/was high
PFE - (O, R, M) PFE sensor signal is/was high

Change DPFE sensor.

39 Transmission Torque Converter clutch not engaging

This sounds bad but if it were my car, I would try changing the ATFluid first.

58 Idle Tracking Switch (ITS) signal problem
Vane Air Temperature (VAT) sensor out of range or open

Check/clean Intake air temperature sensor
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=trouble&Number=1264903&Forum=trouble&Words=iat%20sensor&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=6months&Main=1264901&Search=true#Post1264903
and this
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1b/ca/f8/0900823d801bcaf8.jsp

65 Check intermittent HO2S (signal or ground)

Check and clean O2 sensor connectors.

How tos in Duratec Maintenance FAQ
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=v6maint&Number=958650&page=0&view=collapsed&sb=5&o=31&fpart=1

and Autozone
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1b/ca/f8/0900823d801bcaf8.jsp

Last edited by Tony2005; 07/12/06 12:47 AM.

"Always do the cheap and easy ones first." 1996 V6 ATX 96K miles