|
|
|
|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Originally posted by todras:
Have to remove the splash shield on the pass. side, then the belt, then the 3 bolts that hold the compressor on. After it's free is it not still in the way of getting the freeze plug out and the new fittings on in there. I did this with the motor out so I wouldn't know. You can pull a bumper cover just as easy if not easier.
I just pulled the A/C totally out. I had done it with the motor out, but I didn't use teflon tape...so I had to pull it back out. Took about an hour to teflon all that stuff and re-install.
I was seriously considering the oil filter relocation. I would feel comfy with it if I used SS lines with those screw on AN fittings.
|
|
|
|
|
|
|
