Just found one on the Focus forums...




He has it running forward for his turbo oil feed. But you can still see the little angle fitting that he has screwed into the block. You could probably just get some aluminum spacers and some longer bolts from the hardware store and space your coil off the block 3/4" to clear the fitting.

EDIT
I see that you have a pre-98. You will have to remove the bolt for your EGR pipe in order to shift the bracket out from the block. (It is attached to the bottom of the coil pack bracket.)
EDIT

HTH,
BP

Last edited by ButtonPuncher; 06/16/06 10:39 PM.
Ben ---'96 Contour GL * Zetec ATX * Tan on Black steelies--- +++JRSC M62 Under Construction+++ My big-a$$ mod list.