Originally posted by teamSVTour:
yes i am running one sub and it has on the amp where to place the + and - on the amp terminal to bridge it but bridging I think would put to much power to one sub...thats why I was using 1 channel. My sub is rated at IIRC 300RMS so thats why i was using one channel.
I think i tried putting the RCA's through all the possible combinations to correct the treble. The only inputs where my sub worked is where I have them in the pic.
You could turn the gain down if you ran bridge to prevent an overdrive. I take it the switch is off right now for the bridge mode. Only other thing is run low input and mess with the frq adjustment. What about he HU, does it have sub outputs? Or maybe an internal low pass selection to the preamp output?
JD a.k.a Fingers
"Don't Panic"
'98 Contour GL 2.0L VCT ATX 88k
'98 Contour LX 2.5L MTX 120k
Street racing can kill
just less of a chance with a 2.0
| 
