Originally posted by projectSHO89:
Originally posted by ffos2:
My coolant strength is alrite ! As Tony suggested, I bougth a coolant tester, the coolant tester suspends four balls which according to the coolant tester manual is alrite.




Coolant concentration has little to no effect on cooling system performance.

Time to lay off suggesting this for engines that appear to be running "too warm".....

Steve




Steve (projectsho89), try this for YOUR Contour. Drain the cooling system. Then just put water in YOUR Contour's cooling system, instead of 50/50 coolant and see if the car overheats.

Then drain the cooling system again. Put just antifreeze (100 percent solution) in the cooling system and see if it overheats.

I can assure you, on both occasions, the temp gauge will hover close to the red zone.

Last edited by Tony2005; 07/17/06 01:24 AM.

"Always do the cheap and easy ones first." 1996 V6 ATX 96K miles