Quote:
HE60 DTC P1406: INSPECT DOWNSTREAM PRESSURE HOSE CONNECTIONS
NOTE:
If the fault is currently present, DTC P1408 will be output in Key On Engine Running (KOER) Self-Test.
l Inspect downstream hose at D.P.F. EGR sensor and orifice tube assembly for disconnect or poor connection.
l Is hose OFF or poorly connected?
If you did not reset the codes after working on the EGR tubes (assuming they're fixed) that is a residual code that will, in time, drop out of the system.
My 98 took several weeks to execute the EVAP monitor. It only triggers during a specific set of circumstances that don't seem to match what the service instructions say....
If you reset the codes, either by scanner or by removing battery connections, it will take several more drive cycles for the monitors to run.
At least it's not July 26th....
Steve
98 Contour SE Sport 2.5 Duratec ATX The wifey's car
89 Taurus SHO - 246K miles
94 SHO ATX - 190K
1997 F-150 5.4L ATX - The Workhorse 150K.
ANY THREAD WITH "OMG" or "WTF" ETC IN THE TITLE WILL BE IGNORED!
| 
