Originally posted by amarv12:
You can get one that looks like this :
Get the one labeled for Fords ...you can see it has 4 openings for 4 different sizes of connectors. You close the opening onto the pipe and push the flared end into the connector, then pull the connector off.
The one tool will work on the AC connector and the fuel lines.
Should be a couple of bucks, $5 or so.
I have that and it didn't work. I use a hacksaw instead. 
2000 SVT Turbo 295hp/269ftlb@12psi
#1 for Bendix Brakes Kits!
Knuckles rebuilt w/new bearings $55
AUSSIE ENDLINKS $70
Gutted pre-cats $80/set
A lack of planning on your part does not constitute an emergency on mine!
| 
