Originally posted by Tony2005:
....Using an ohmmeter measure resistance to ground in Circuit 31 (BK) from RH low beam bulb socket.....
You should start by cleaning the connector first just in case some dirt got in or it is rusted inside.
Assuming it is a ground fault,
Unplug the RH low beam bulb connector. Unwrap the wiring "external wrap". You should see a wire which is Black (BK) Circuit 31. You need to test it. If you don't want to or don't know how to, just splice another wire to this end and ground it.
If it was a ground fault, then, the headlamp should be (or close to) as bright as the other side.
"Always do the cheap and easy ones first."
1996 V6 ATX 96K miles
| 
