|
|
Joined: Dec 2005
Posts: 6
Newbie
|
OP
Newbie
Joined: Dec 2005
Posts: 6 |
I have a 99 Contour SE Sport with worn out front control arm bushings. I've searched high and low on the internet (including this website) and nobody sells just the bushings - you have to buy the whole control arm. The only place I've found that sells the control arms is BAT Inc. I called them and they're out of stock and don't expect more to come in for several months. Can anybody help me locate a vendor who sells these control arms? Thanks in advance!
|
|
|
|
Joined: Dec 2005
Posts: 6
Newbie
|
OP
Newbie
Joined: Dec 2005
Posts: 6 |
BTW, my control arms have the vertical two-bolt bushings.
|
|
|
|
Joined: Dec 2001
Posts: 6,910
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Dec 2001
Posts: 6,910 |
try checking the parts source page on the main page ...
also go to teamfordparts.com, there are like $60 a arm, just replace the arm and you will be good to go
- 95 Mystique LS - Zetec/5spd
- 99 Contour SeVT Sport - Duratec/5spd
Official NE-CEG Contour/Mustang Family
|
|
|
|
Joined: Dec 2005
Posts: 6
Newbie
|
OP
Newbie
Joined: Dec 2005
Posts: 6 |
Cool - Thanks! I ordered a left and a right control arm from teamfordparts.com for $104 including shipping.
|
|
|
|
Joined: Oct 2001
Posts: 8,445
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Oct 2001
Posts: 8,445 |
lucky...i had to pay $105 each, for my LCAs.
NY State Trooper: So what makes your car so special to have SVT all over it?
Me: Er...It was made by Fords SPECIAL Vehicle Team?
|
|
|
|
Joined: Mar 2003
Posts: 7,117
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Mar 2003
Posts: 7,117 |
Originally posted by ElKy: lucky...i had to pay $105 each, for my LCAs.
Two bolts RULE!!
Must be that jumbly-wumbly thing happening again.
|
|
|
|
Joined: Mar 2002
Posts: 1,325
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Mar 2002
Posts: 1,325 |
Originally posted by ElKy: lucky...i had to pay $105 each, for my LCAs.
Where did you get them that cheap - that's like $40 better than I found?
97 Contour SE MTX
K&N 3530, UR UDP, 19# Injectors, mystery mod, FMS wires, Fordchip.com chip, SVT: TB, Flywheel, clutch, exhaust
04 Grand Caravan SXT
|
|
|
|
Joined: Aug 2003
Posts: 4,140
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Aug 2003
Posts: 4,140 |
Originally posted by TourDeForce: Two bolts RULE!!
Except that the design sucks - a lot.
|
|
|
|
Joined: Aug 2003
Posts: 4,140
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Aug 2003
Posts: 4,140 |
Originally posted by ScottK: Originally posted by ElKy: lucky...i had to pay $105 each, for my LCAs.
Where did you get them that cheap - that's like $40 better than I found?
There's a CEGer that has a good price. Bill is close to that, too.
|
|
|
|
Joined: Jun 2000
Posts: 291
CEG\'er
|
CEG\'er
Joined: Jun 2000
Posts: 291 |
The 2 bolt arms, although easier to remove and install are a worse design than the 4 bolt arms. Ford even went back to the 4 bolt arms with later Cougar production because of this.
The 2 bolt design puts undue stress on the bushings and causes them to fail prematurely. When they do go, the A arms flop around-not a good situation.
If you have a choice go with the 4 bolts. Eventually, I'll have replacement bushings for them.
Redcoat Raceworks. Performance parts and custom fabricating for Contours, Mystiques and Cougars. Specializing in chassis and suspension parts. Custom end links, control arms, strut tower bars, engine torque braces, etc.
|
|
|
|
|
|