Originally posted by Phil Rohtla:
I just had the hydraulic unit replaced. The codes I quoted were from before it was done. Ford wanted $2700 Cdn. for the job so I went to a wrecker for the piece, then had the ABS unit flushed by Ford. The light was acting normal: every time I turned on the car, the light would be on for 30 seconds or so, then go off. Naturally, as soon as I hit the brakes, it came back on. After a couple of days of this, it would stay off for a while then come back on. I am very confused.
Maybe the used HCU is faulty, the HCU needs to be bled again or the wiring harness is the culprit.
Edit. What are the new ABS code(s)?
Last edited by Tony2005; 05/30/06 02:01 PM.
