Originally posted by SVTGT350:
Obviously you were interested enough to look at the thread.
Really its not all that hard, cost is less than say a carbon fibre hood or trunk. The amount of modification to the tower I don't believe will be as significant as I originally thought.
Even if nobody absolutely needs such a fine adjustment so what, I am making something that will replace the insufficient upper mount that the car came with and one that will allow caster and camber to be adjusted individually instead of compromising between the two with the offset mount currently available.
If you aren't interested don't post if you are interested don't sh*t on the idea.
OK - it's not like I haven't made anything for the CDW-27 platform, and had a group-buy or 3 for........ what would I know. 
Sorry to burst your bubble.
2000 SVT Turbo 295hp/269ftlb@12psi
#1 for Bendix Brakes Kits!
Knuckles rebuilt w/new bearings $55
AUSSIE ENDLINKS $70
Gutted pre-cats $80/set
A lack of planning on your part does not constitute an emergency on mine!
| 
