|
|
Joined: Aug 2001
Posts: 65
CEG\'er
|
CEG\'er
Joined: Aug 2001
Posts: 65 |
Originally posted by Big Jim: If you can see a 3/8" square hole in the device you have probably found the right thing.
I strongly recommend you buy a special tool for it. It is hard to access with a conventional 3/8" ratchet or breaker bar.
I agree. There isn't enough room to get a ratchet in there. The frame member is too close. I found the best access by removing the right front wheel and removing the plastic splash guard.
'98 LS MTX
|
|
|
|
|
|