Contour Enthusiasts Group Archives Forums General General This is what were up against my friends

Honda Speed Comparison Chart


Car Liters HP Torque 0-60 1/4 mile 60-0 Vtec
Integra Type R 1.8 195 130@7800 rpm 6.2 14.7 125 ft. Yes
Integra GSR 1.8 170 128@6200 rpm 7.2 15.1 131 ft. Yes
Integra LS 1.8 140 124@5200 rpm 7.8 15.9 134 ft. No
Integra RS 1.8 140 124@5200 rpm 7.8 15.9 148 ft. No
Civic SI 1.6 160 111@7000 rpm 7.4 15.7 141 ft. Yes
Civic EX 1.6 125 107@ 5500 rpm 9.1 17.6 151 ft Yes
Civic LX 1.5 106 103@ 4600 rpm 9.1 17.6 151 ft. No
Civic DX 1.5 106 103@ 4600 rpm 9.1 17.6 151 ft. No
Civic HX 1.5 106 104 @ 5400 rpm 9.1 17.6 160 ft. No
Prelude SH 2.2 200 156@5250 rpm 6.8 15.0 138 ft. Yes
Prelude Base 2.2 200 156@5250 rpm 6.8 15.0 138 ft. Yes
S2000 2.0 240 153@7500 rpm 5.5 14.4 115 ft. Yes
NSX 3.2 290 224@5500 rpm 4.8 13.2 115 ft. Yes

If you want a better look at these stats go here
http://www.hondahookup.com/honda_speed_chart.php

:rolleyes:

So much torque its scary. :rolleyes:

I agree LoCo. Most of those motors don't have the torque to twist off a bottle cap.

and these are CRANK numbers- not Wheel

If they could produce the torque curves and numbers.....they would be a car I would want, but that is one of the reasons I would never buy a Honda

Last time I dynoed there was a Civic with 115HP and 90TQ at the wheels!

I've never been "up against" a Honda in my life...

The S2000 and NSX are in a league of their own. That would be flatout stupid to match up a CSVT with an NSX!