Contour Enthusiasts Group Archives Forums Modifications 3.0L Duratec Installing engine mount after heads instlled?

No later, they use the 8mm bolts.
My 99 used 8mm bolts as well but the 98's seem to have been a crossover year and had 10mm or 8mm bolts.
My 98 Taurus block used 10mm bolts so to make it fit I drilled/tapped the 99 contour motor mount to fit the 10mm bolts and problem was solved.

On the '01 escape it used an identical mount as the 99contour mount I had, both in bolt size, shape, and functionality.
So consider it another source of a motor mount if you wish.