|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Originally posted by fastcougar: What year/make block? I used a 2002 Escape block and had to use the "skinnier" bolts.
03 Merc sable
|
|
|
|
Joined: Dec 2004
Posts: 1,190
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Dec 2004
Posts: 1,190 |
well grinding wasn't going so well so i took off the head...see arp comes in handy!! sand blasted and painted the mount..looks good.... ...i ground off the dowl pins from the mount cause they would not fit in the block...took the dowel pin out of the block...I got new bolts...M8 1.25 x 100 millimeters two of these and\
M8 1.25 x 70 millimeters two of these also....i put some washers in and the mountbolts on perfectly...now i have to put the head back on...pictures will come later..mount doesn't budge! starting to like power tools...
Last edited by svtProdigy; 04/19/06 09:42 PM.
PLEASE HELP ME GET MY CAR TOGETHER! ITS IN DAYTON OHIO! I need the motor together and in the car so i can DRIVE it! Pleeeeeese!
diamond pistons for 3.0/forsale
#702 of 2150
|
|
|
|
Joined: May 2000
Posts: 1,336
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: May 2000
Posts: 1,336 |
Originally posted by mapoftazifoshoĆ¢ā??Ā¢: Originally posted by fastcougar: What year/make block? I used a 2002 Escape block and had to use the "skinnier" bolts.
03 Merc sable
That right there might be why ... Taurus/Sable block is definitely different from Escape/Mariner/Tribute block.
|
|
|
|
Joined: Jul 2004
Posts: 1,746
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Jul 2004
Posts: 1,746 |
Originally posted by mapoftazifoshoĆ¢ā??Ā¢: Originally posted by Todd aRRRRRRRRR.: And you used the thicker bolts on the block?
IDK what bolts I used. Little bit a this, little bit a that...
But in all seriousness, I used the stock 2.5L bolts...they worked.
After seeing that...I'm afraid to ride in your car...
Anyways...Lets get this all straightened out.
The Contour mount/bolts(?) will work on which blocks? The Cougar mount/bolts(?) are needed for which blocks?
2000 Contour SVT
SF - #542 of 2150
|
|
|
|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Well all those bolts are from the 3L that I didn't need. I don't need 2 sets of header bolts and studs. I also didn't need all the timing cover bolts, and then the valve cover bolts.
As far as the taurus motor, I think Todd used a taurus block.
|
|
|
|
Joined: Jul 2004
Posts: 1,746
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Jul 2004
Posts: 1,746 |
Originally posted by mapoftazifoshoĆ¢ā??Ā¢: Well all those bolts are from the 3L that I didn't need. I don't need 2 sets of header bolts and studs. I also didn't need all the timing cover bolts, and then the valve cover bolts.
As far as the taurus motor, I think Todd used a taurus block.
psst...I was only kiddin...hehe. Call it poor sportsmanship, because you beat me on finishing the 3L. hehe
2000 Contour SVT
SF - #542 of 2150
|
|
|
|
Joined: Dec 2004
Posts: 1,190
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Dec 2004
Posts: 1,190 |
Originally posted by posthuman63t: Originally posted by mapoftazifoshoĆ¢ā??Ā¢: Originally posted by Todd aRRRRRRRRR.: And you used the thicker bolts on the block?
IDK what bolts I used. Little bit a this, little bit a that...
take the spark plugs out of the picture and the bolts with the rubber washer which are for the valve covers and there is really not much left...looks like you have some front cover bolts...couple lower intake bolts...tranny bolt
But in all seriousness, I used the stock 2.5L bolts...they worked.
After seeing that...I'm afraid to ride in your car...
Anyways...Lets get this all straightened out.
The Contour mount/bolts(?) will work on which blocks? The Cougar mount/bolts(?) are needed for which blocks?
take the spark plugs out of the picture and the bolts with the rubber washer which are for the valve covers and there is really not much left...looks like you have some front cover bolts...couple lower intake bolts...tranny bolt
PLEASE HELP ME GET MY CAR TOGETHER! ITS IN DAYTON OHIO! I need the motor together and in the car so i can DRIVE it! Pleeeeeese!
diamond pistons for 3.0/forsale
#702 of 2150
|
|
|
|
Joined: Aug 2001
Posts: 5,810
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Aug 2001
Posts: 5,810 |
Originally posted by posthuman63t: Originally posted by Todd aRRRRRRRRR.: Way to read the fuggin stickies.
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=3L&Number=740593&page=0&view=collapsed&sb=5&o=2&fpart=1
2nd up from bottom. And also in the top sticky. You need 2 long bolts and 2 short bolts. Contour mount will not bolt to the 3L block. Different bolt size. Cougar mount is $32 from Jenkins.
OMG I overlooked something....?!?! That sucks...so technically ALL 3L's in tour Have to have the 01+ Cougar mount...
No, you can just drill out the holes in the motor mount to fit the larger holes on the older blocks and on the newer blocks the bolt holes are the same as the 99+ bolts.
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
|
|
|
|
Joined: Dec 2004
Posts: 1,190
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Dec 2004
Posts: 1,190 |
wrong...my 2001 block has smaller bolt holes in the block than the 2.5...its not the size of the holes in the mount but the size of the bolt that fits in the block. the dowel pins pressed in the mount were too big to fit in the 3 liter block also.
Last edited by svtProdigy; 04/20/06 02:02 AM.
PLEASE HELP ME GET MY CAR TOGETHER! ITS IN DAYTON OHIO! I need the motor together and in the car so i can DRIVE it! Pleeeeeese!
diamond pistons for 3.0/forsale
#702 of 2150
|
|
|
|
Joined: Aug 2001
Posts: 5,810
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Aug 2001
Posts: 5,810 |
okay, you had the earlier mount/bolt style, no biggie. I mentioned the later style. In your case you just use the escape/contour mount with the smaller bolts. They were identical on my engines. 99SVT->'01ESC
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
|
|
|
|
|