|
|
|
|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Originally posted by Todd aRRRRRRRRR.:
Originally posted by fastcougar:
It's the other way around:
Bolt shanks are different diameters from Contour/Cougar to Escape ... not sure about the Taurus. The mounts are nearly identical and are interchangable, it's the bolts that must be swapped. I have pictures at home and can post them if you want ... both mounts side by side ... only difference is the bolt shank diameter.
OK. Good to know. Would still get a Cougar mount as there is less to grind. Pete you couldn't have used the stock bolts unless you tapped the block to accept them.
I installed the mount and the bolts worked! I don't recall stazi giving me some other bolts. I used the stock ones, 2 long and 2 short.
|
|
|
|
|
|
|
