Originally posted by pimpdcontour:
will they work on a post 98? is it just a few simple wires or just a couple plugs.



Mine is a 98. This is what I had to do to wire the LED in the handle light:

    1. Pulled the window switch cluster out
    2. Located the two wires that controlled the light in the switch
    3. Cut the insulation to the two wires
    4. Soldered the LED lead to the bare wire for the window light.
    5. Insulated each new soldered wire.


With the LED wired to the window switch lead, the light will come on whenever the car is on, just like the switch lights. You could also wire it to the door lock switch light, but I had an easier time locating the correct 2 wires on the window switch. A wire splice crimper would also work in place of soldering, I just like to make sure things are wired for life.

BrApple-its all in the way it is presented...but everythign on my resume is all me TexasRealtor-I hope you spelling improves on your resume. MxRacer-ladies and gentlemen, welcome to ironyville. population, texasrelator.