Originally posted by mapoftazifoshoââ??¢:
We'll see. Maybe Stazi can give me some tips on my brazing. 
clean it...sand it smooth and then clean it with acetone. Run some acetone through the rail if possible. The gasoline is getting into the brass and screwing it up. Also....don't heat it too much...all the brasing rod has to do is melt....once it starts to melt pull the torch away and add the stick. Keep the torch just close enough to keep the metal past the melting point of the brasing rod. Also, try a new rod (one with flux all the way to the end)....it may just need more flux.
People suck.
Rev it till it MELTS.....
| 
