Contour Enthusiasts Group Archives Forums Modifications Duratec Performance Help with oil pressure gauge fittings

Echo in here.

First thing I saw was how loose the ferrule is on the tube. Go buy another compression fitting - one with the symmetrical feerrule, they work a lot better IMHO.

Stazi, that was actually a piece of wire i used in the pictures for illistration purposes, the actual tube is plumbed from the a-pillar to the engine bay. (nothing attached yet). It fits more snugly than the wire in the pictures.

Todd, thanks for a confirmation on tighter fittings, looks like ill just put a little hurtin on it then.

Thanks again all,

Adam