My brake fluid has been dirty since I bought the car. I don't mean like a little cloudy, I mean almost jet black. I'll have to take a picture so you guys can gasp in disgust.
Anyways, the first time my uncle and I bled the brakes we found that the fluid was very nasty which probably contributed to my mushy brake pedal. After the flush, the fluid was clean but one trip around town and it was back to the same. Fast foward to October of last year and I had the system flushed again and had ATE Superblue put in while the Koni kit was installed. The pedal felt fine. I then had the resevoir cleaned out the day before a trackday and it looked decent.
The brakes worked fine at the trackday with no evidence of boiling fluid or anything like that. The pedal however began to get mushy again after a few months. I had the Ford dealer power flush the brakes this time which greatly improved pedal feel and brake response. The fluid was clear until I got home and then it looked cloudy. Now it's looks nasty again.
Any suggestions as to why my brake fluid will not stay clean?
