warmonger , It has become clear to me that you and many others DONT understand how the MAFia works
The MAFia DOES NOT change the stock electronics "range" it still will be limited to .001 to 4.999 Volts
It also DOES NOT change the sampling points
This is a crude way to say how it works but let me try it this way and maybe many can understand it better if you have say 3.000 Volts with the MAFia set to say 4 setting this would be -40% OFF the 3.000 Volts = 1.700 Volts that now goes to the ECU this same -40% works through out the entire .001 to 4.999 range If you are on setting 4 , There is ways to correct for this in ANY tune because i have done it with the
Diablo ( has all the math done where you just hit the "4" setting and it calculates it all in the tuning software
Sniper and SCT can be done 1 of 2 ways either by changing the Maf Transfer Functions or by the High/Low slopes for the injectors
This is VERY simple VERY accurate devise to use there is NOTHING on the market that will replace the ease of use or cost of your meter maxing out
Tom
