|
|
Joined: Sep 2002
Posts: 1,150
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Sep 2002
Posts: 1,150 |
Originally posted by Stazi: Joe, The stock plates are NOT supposed to touch the towers. This is normal.
huh? yes they are - they were touching before i put the new suspension in.....! come on stazi - p.s. knuckle works great, bearings are still good and have about 500 miles on them. thank you
About the nuts... I used the original nut to hold the suspension together and a new nut for the top plates under the hood.... soooo there really is no way that the way i have it now is wrong...
I need a picture of someones cone hat for the front suspension to compare to mine with the depth measurements or something.....
I also noticed that when the suspension was together b4 i put it in, the cone hat would sway like a bent rim when i spun it on the shock... the only logical thing is the cone hat is bent or the rubber is worn.
I wanted to see if anyone else had or has this problem and has found a way to fix it....
|
|
|
|
|
|