Originally posted by Rev. Po-Jay:
I may be stating the obvious, but has anyone thought of putting a Top-Mount IC (Ala- WRX) just ahead of the firewall? It seems like there could be enough room and the piping already routes that way with this kit. It might not be the prettiest setup, but it has to be better than notching the frame to fit a FMIC.
Just a thought...
No room there unless its ON the hood. 
Stazi had a plan to use a hood scoop above the stock airbox locationfor a small eclipse Air-Air byt it just turns out better all the way around with the water-air because of how small the core can be to get the same intercooling effect.
Of course you have to have plenty of area for the exchanger in front of the radiator too though.
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
| 
