Contour Enthusiasts Group Archives Forums General Troubleshooting Erratic idle and tends to die at idle.

Print Thread

Re: Erratic idle and tends to die at idle. #1529725 03/19/06 02:15 AM
Joined: Jun 2005 Posts: 5,345 Virginia, USA T Tony2005 Addicted CEG\'er
Tony2005 Addicted CEG\'er T Joined: Jun 2005 Posts: 5,345 Virginia, USA	For the 211, check the wire/connector to the crankshaft position sensor. 233 could be related to the CKP sensor too. Check the CKP sensor before getting the coil pack. Edit. According to Haynes, the resistance between the CKP sensor terminals (after disconnecting the connector), should be between 200 to 450 ohms. Last edited by Tony2005; 03/19/06 02:33 AM. "Always do the cheap and easy ones first." 1996 V6 ATX 96K miles

Entire Thread
Subject	Posted By	Posted
Erratic idle and tends to die at idle.	Pepse	03/19/06 02:04 AM
Re: Erratic idle and tends to die at idle.	Tony2005	03/19/06 02:15 AM
Re: Erratic idle and tends to die at idle.	Pepse	03/19/06 03:21 AM
Re: Erratic idle and tends to die at idle.	Tony2005	03/19/06 11:52 PM
Re: Erratic idle and tends to die at idle.	Pepse	03/20/06 06:31 AM
Re: Erratic idle and tends to die at idle.	Pepse	05/07/06 05:28 AM

Link Copied to Clipboard