Originally posted by convert:
...Quote:
"At a minimum, I would cover up the MLPS, TSS and VSS by rigging a plastic sheet over it to prevent water from getting to it."
-- not sure how I would do this?
Cut a garbage bag up into three circles. For the VSS, cut a line along the radius of the circle. Then tape it with duct tape. For the TSS and MLPS, just tape over the sensor with the circles. Note that you can determine which is the culprit by doing it one by one (or tape two and leave one out). When it doesn't show the O/D light when wet (after taping the sensor), you found the culprit.
"Always do the cheap and easy ones first."
1996 V6 ATX 96K miles
| 
