Originally posted by Tony2005:
Originally posted by 00_HO_Contour:
...which still leaves the slight possibility that one of my mounting screws pierced a couple wires.

BTW tony, I disconnected the neons and nothing changed.


Did you disconnect it at the constant 12 volt "tap"?
In addition, as you suspected, check where the screws were mounted to remove the possibility of the wires being pierced.


Yep, right at the fuse. That was my next step, take my lead tester and try to fish around for anything I can find in those 1/8" screw holes

Alex 00 T-Red/Tan SVTC #1964/2150 167 HP @6800 153 TQ @3000 Sold- 98 'Tour SE 24V 5-spd 149 HP @5900 148 LB FT @4300