i replaced the clutch hydraulic line in my 99 contour duratech and it wond start now! i think it has something to do with the clutch lock out system(or whatever locks the starter until clutch is engaged) had a major line leak and disconnected the hyraulic line. reconnected it to see if a new o ring would fix the problem got worse then the car just quit starting. i figured it might have something to do with the lack of hydraulic pressure so i didnt pay much attention to it. now i have the line replaced all pressure has returned but the car still wont start(if i push the clutch any further itll go through the firewall) my friend and i bump started it to see if it was something outside the starting system...started and ran fine. i cleared the computer to see if for some reason the computer was being stupid and locked it up no luck can anyone help me?!
