Passenger side wheel bearing?

Originally posted by Jay Starling:
Depending on how handy you are, you can check it before you go. Jack the car up on the passenger side leaving the front wheel on. Now grasp the wheel at 12 and 6 o'clock. Gently try to rock the tire toward the engine compartment and then back out to the fender. If you can rock it back and forth, your wheel baring is most likely shot. If you put your hands at 10 and 2 o'clock and try to rock it you can tell if it is a tie-rod end. If it rocks and you see the wheel hub move but the tierod does not, then you have a bad outer tierod. If both the hub and the tierod move easily, you may have an inner tierod bad.

Hope this helps.



Last edited by Tony2005; 03/06/06 07:30 PM.

"Always do the cheap and easy ones first." 1996 V6 ATX 96K miles