Originally posted by louisw:
F7RZ-5486-A... they use to be like $10 each at most.
I've posted it many a time and you can go away from the stock mounts without welding or cutting by using the ProThane $12 bushing kit that is supplied with the brackets. Just get yourself a few washers and a high grade small long bolt. Put the bolt through the hole where the tab normally goes and then with washers on the top & bottom just crank your nut nice and tight, use the stock bolt for the other hole.
3 1/2 yrs and a SCA (South County Autosport) 21mm bar on Eibachs/Koni's and my subframe has not shredded itself apart. I got tired of bending brackets and was too cheap/lazy to have beefed up mounts welded in. I figured this would be a temporoary fix but it has held up unbeleivably well. Every 6-months or so I disassemble and slather the bushings with more synthtic white marine grease to keep the squeeks down.
Money doesn't always bring happiness. People with ten million dollars are no happier than people with nine million dollars ~ Hobart Brown
| 
