Originally posted by Y2KSVT:
Looks to be a really clean pre-98! If you're hell bent on keeping those wheel covers, get yourself a multi-pack of sandpaper, some primer, aluminum wheel paint, and some clear coat. Sand the bad areas down from lowest grit to highest until smooth. Shoot the areas with primer(2 coats). Then shoot them with the wheel paint. I'd do 2-3 coats, 24 hours apart. Once they're dry, do a few coats of cleacoat. SHIZZAAAAM, brand new wheel covers. I had to do this with the center caps on my SHO.

Mark



That sounds like it should work. Be careful to spray lightly to avoid drips. You should probably do all 4, to make sure they match.

MUST SELL - ECM computer new for a 98 V6 mtx + pats Now trolling in a Red Nissan 4 x 4