Originally posted by ed6407:
Alright, coming close to making final decisions. One more thing, my dad says we'll need to yank the motor from underneath the car. Only problem is, we don't have a way of doing that. Does it HAVE to come from underneath or is there another way?
You can pull it either way. Pulling through the top just requires you to get under the car and get all the connections to the subframe unbolted and the axles out of the tranny. It's easier with the intake/exhaust manifolds completey removed and the cylinder head on. Oh and remove the AC compressor, makes clearing everything a little easier. Of course the hood should be off also.
Originally posted by shamun:
Ohsigmachi,
How much would cylinder work cost?
shamoon
Cylinder head or cylinder bore/hone?
Ohsigmachi '96 GL MTX Zetec
--I don't won't to hurt you, but it's still on my list of things to do.--
View project Slippery Slope
| 
