|
|
Joined: Jul 2004
Posts: 1,651
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Jul 2004
Posts: 1,651 |
Originally posted by Blackcoog: Prototype kit was finished and installed. 55HP was added to a stock ATX Cougar which was tested on a Vericom (Gtech like unit). The compressor map is here: Compressor Map on Page 2 Even though the kit wasn't verified on a dyno (should have been) a back to back comparison changing from stock to the supercharger, if done right, will be fairly accurate. Just wait until June 16th when all the group buy kits are shipped. Hard numbers will be posted. The kit looks like it has lots of potential if installed and tuned correctly.
Here is a good writeup on the Vericom unit I found while looking into how accurate it was: Click me
For 55 give or take, is not worth 2200 dollars.
I am also waiting to see what it produces on the dyno. If it produces decent numbers. I might be ordering this kit.
I reject your reality and substitute my own.
|
|
|
|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Originally posted by Rickson: Originally posted by Blackcoog: Prototype kit was finished and installed. 55HP was added to a stock ATX Cougar which was tested on a Vericom (Gtech like unit). The compressor map is here: Compressor Map on Page 2 Even though the kit wasn't verified on a dyno (should have been) a back to back comparison changing from stock to the supercharger, if done right, will be fairly accurate. Just wait until June 16th when all the group buy kits are shipped. Hard numbers will be posted. The kit looks like it has lots of potential if installed and tuned correctly.
Here is a good writeup on the Vericom unit I found while looking into how accurate it was: Click me
For 55 give or take, is not worth 2200 dollars.
I am also waiting to see what it produces on the dyno. If it produces decent numbers. I might be ordering this kit.
It's 55 hp from a gtech on an ATX car.
I woudl also say 55 hp is def worth 2200...
Tell me a better way to get those kind of gains spending less or the same elsewhere?!
|
|
|
|
Joined: Jul 2001
Posts: 829
Veteran CEG\'er
|
Veteran CEG\'er
Joined: Jul 2001
Posts: 829 |
55HP not worth $2200? Wow, check this math:
Thomas Knight S/C $2200/55HP = $40/HP
MAF $300/5HP = $60/HP
Headers $1200/15HP = $80/HP
By my math, that is leaps above the other mods.
SVT Parts For Sale!PM Me.
2006 M6 Cyclone Gray GTO
1995 Mazda Protege Commuter Special
93 FXDWG Dyna Wide Glide
I'm A TROLL Now!~
|
|
|
|
Joined: Jul 2001
Posts: 2,974
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Jul 2001
Posts: 2,974 |
Can the Thomas Knight S/C be used with the MSDS Headers?
Aaron
AKA NVS SVT
98.5 Silver/Blue SVT#4553
Yeah it's modded
98 T-Red/Blue SVT Contour Totaled 06/05/06
03 3L,VCN 2000,CAT Cams,MSDS Headers w/Y-Pipe,XCal2 and lots more
|
|
|
|
Joined: Sep 2004
Posts: 1,978
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Sep 2004
Posts: 1,978 |
as far as i know the TK kit doesnt go anywhere near the headers. Its tucked over by the fender, and the way they have their piping routed, goes up and over the back of the motor .
Alex
'99 SVT Contour
-=|WANTED: Vortech, working or not |=-
|
|
|
|
Joined: Mar 2005
Posts: 899
Veteran CEG\'er
|
Veteran CEG\'er
Joined: Mar 2005
Posts: 899 |
heat soak for the intake piping
98 CSVT t-red
1737#
cf1 Cowl hood
Centerline Storms
CEG Dragon Run- Oct 13-15
WTB- Vortech S/C kit/ADC Turbo Kit
|
|
|
|
Joined: Jul 2004
Posts: 1,651
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Jul 2004
Posts: 1,651 |
Originally posted by maposhitheadfoshiz: Originally posted by Rickson: Originally posted by Blackcoog: Prototype kit was finished and installed. 55HP was added to a stock ATX Cougar which was tested on a Vericom (Gtech like unit). The compressor map is here: Compressor Map on Page 2 Even though the kit wasn't verified on a dyno (should have been) a back to back comparison changing from stock to the supercharger, if done right, will be fairly accurate. Just wait until June 16th when all the group buy kits are shipped. Hard numbers will be posted. The kit looks like it has lots of potential if installed and tuned correctly.
Here is a good writeup on the Vericom unit I found while looking into how accurate it was: Click me
For 55 give or take, is not worth 2200 dollars.
I am also waiting to see what it produces on the dyno. If it produces decent numbers. I might be ordering this kit.
It's 55 hp from a gtech on an ATX car.
I woudl also say 55 hp is def worth 2200...
Tell me a better way to get those kind of gains spending less or the same elsewhere?!
Well i was thinking going 3l would be a better gain overall. For half that amount. 1k would be perfect. Maybe we forgot about that in this topic.
I guess if it was upward towards 75hp. I would be willing to dump 2200 into this kit.
I reject your reality and substitute my own.
|
|
|
|
Joined: Aug 2003
Posts: 2,097
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Aug 2003
Posts: 2,097 |
Think about the vortech kit...what does that give you? 60hp for 3k-3500 and then it will break on you!!!
98 E0 SVT with some stuff
|
|
|
|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Originally posted by stilov: Think about the vortech kit...what does that give you? 60hp for 3k-3500 and then it will break on you!!!
100+hp
|
|
|
|
Joined: Aug 2003
Posts: 2,097
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Aug 2003
Posts: 2,097 |
who has gotten 100+?
MOst I have seen go from like 170-180 to 220-230.
I know rick has more...he he more than just SC. Who has taken a stock SVT and put down 100 more and been reliable?
98 E0 SVT with some stuff
|
|
|
|
|
|