OK, so I got a pair of rear disc knuckles out of the junk yard and here's what I want to do.
1) Replace the bearings and hubs.(stazi, you out there)
2) powdercoat knuckle flat black
3) replace the rubber bushings with shore94 (Josh, I think
you could help with 2 & 3)
4) reinstall with Eibach wheel spacer kit and TCE brake kit
and the calipers I just rebuilt.
I took the spindle/caliper assemblies over to the auto hobby shop on post and did some preliminary disassembly.
Here are my questions.
How do I get the hub assembly off the knuckle (I searched so keep it to yourself) if you have an harbor press?
Which of the above should be done first?
Thanks all
