Originally posted by bigworm:
zetec 4 cyl at first i had a cylinder 2 misffire..... this are all the things ive done to the car in less than 48 hrs.... new spark plugs new wires new ignition coil new fuel filter new fuel pump and strainer and iac with new seal and new maf.... and now it does even want to turn on i checked the fuel lines coming to the injectors and they are receiving fuel all the way up to the injectors... i have not checked to see if im gettin a spark... it might be the css but the car was running before i did all this.... what else could it be ? theres no oil leaks and timing belt is still on and belt also
It is beyond me why you replaced all of that.
If CSS means clutch start switch, this would prohibit cranking.
If the engine cranks but does not start, treat it as flooded first. Then check fuel pressure, spark, and firing order.
"Those who cannot remember the past are condemned to repeat it" -George Santayana
| 
